The core part of the heat press machine is the heating plate, so pay attention to it when choosing the heat press machine.
The upper and lower plates should be made of aluminum, and the heating tube is cast in the aluminum plate. If the upper plate is slotted with an aluminum plate, and then attached to the top with a heating tube, it will cause unnecessary energy loss, and it will have the disadvantages of slow heating and large temperature difference.
If the lower plate is made of iron or other materials, it will be easily deformed and aging if it works in a high temperature and high pressure environment for a long time.
According to the area of the heating plate, there are weight standards for the upper and lower plates. If it is too light and too thin, the heating plate will be easily deformed, affecting the use. Generally speaking, the greater the weight, the more reliable the performance.
After pressing the upper plate of the heat press machine, it should be absolutely parallel to the lower plate. To test whether the upper and lower plates are tightly engaged, you can put a piece of hard paper or other sheet-like tough material in the four corners, and then press down the handle. After the upper and lower plates are locked, the hard paper is pulled outward , You can know whether the upper and lower plates are flat and the machine is qualified.
