1. Pull up the direct pressure handle to fully open the heating plate. Plug in the power supply, turn on the power switch, the indicator light is on; Note: Due to the high power of the machine, the whole machine must have a suitable and reliable protective ground wire !!!
2. Temperature adjustment: Press the "" or "-" key to set the temperature, press the "" key to increase the temperature setting value, press the "-" key to decrease the temperature setting value.
3. Adjust the left timer knob to an appropriate time to 10 seconds (the time depends on different materials);
4. When the temperature reaches the set value, the machine will automatically enter the constant temperature state;
5. Place the transfer material such as clothes and flat on the printing platform, stack the pictures to be transferred, and press the pressure handle down; Note: The pressure should not be too large, otherwise it will cause the pressure handle to deform! pressure.
6. When the time is up, the buzzer sounds, then lift the pressure handle, remove the transfer object such as clothes, and tear off the bottom paper.
7. The temperature of the baked metal plate is generally 170-200 ℃, the time is 20-40 seconds; the temperature of the baked porcelain plate is generally 200-220 ℃, the time is 120-150 seconds; the temperature of the baked fabric is generally 120-140 ℃, The time is between 5-10 seconds.
