The heat press machine is a printing appliance. Generally, I see some images on tiles or some clothes are printed by the heat press machine, but the models used for items of different materials will also be different, but whether it is The following four points need to be put in place on which materials to print, so as to make the effect very ideal.
1. Keep the machine clean:
Maintain important components and clean the machine. Dust can not be dyed with oil. The thermal transfer film should be kept clean without fingerprints and dust. Keep the printed products clean and free of dust and grease;
2. Hot stamping pressure:
The stamping pressure must be adjusted to the most suitable position. Otherwise, if it is too large, it will easily damage the glue head and the stamping object. If it is too small, it will affect the stamping effect. After adjusting to the best stamping pressure, the pressure should be adjusted and locked to avoid changes in mass production.
3. Hot stamping temperature:
The hot stamping temperature has a great influence on the quality of the heat transfer product. Too high a hot stamping temperature will damage the substrate. If the hot stamping temperature is too low, normal heat transfer may not be achieved. The heat temperature should be based on factors such as substrate, film, and heat transfer machine. Different materials have different heat temperatures.
4. Hot stamping speed:
The stamping time (speed) should be determined according to the specific stamping requirements. Under the condition of ensuring the stamping effect, the higher the speed, the higher the production efficiency. However, due to certain special conditions, some products must be stamped.
